This printer is managed by PaperCut.  Users must have funds in their PaperCut account to print.  Students can add funds online via credit card, or by purchasing pre-paid cards through Western Libraries.  Funds are usable anywhere PaperCut is used on campus.

You can check your account balance online at https://papercut.uwo.ca  If you require additional funds for printing, you have the following options available to you:

• Ask your supervisor to top up your account (graduate students only)
• Pay from your grant (faculty only; speak with the main office staff)
• Pay online via credit card
• Purchase a pre-paid PaperCut card through Western Libraries

This printer is managed by PaperCut and has an integrated RFID reader.  To log in to the printer to release print jobs, scan, or photocopy, you will need to tape your WesternONE card where indicated on the printer.

The first time you do this, you'll be asked to associate your WesternONE card with your PaperCut account, as discussed in the next section.

The first time you tap your card, you will need to enter your Western username and password to associate your WesternONE card with your PaperCut account.  This is a one-time setup process.

1. Tap your WesternONE card where indicated
2. Use the touchscreen to enter your Western username and password. Tap  Associate Card .
3. You should see a message indicating that your card was associated successfully.
4. Log out using the indicated button.
5. Tap your WesternONE card again to verify that you are able to log in.

When you print to the printer, your job will be held.  You must bring your WesternONE card to MC 352 and follow the instructions below to release the job.

1. Tap your WesternONE card to log in
2. Your quota and pending jobs will be displayed.  Tap Select Jobs.
3. Tap Print beside the job you wish to release.  Alternatively, you can tap Print All to print all held jobs.  Your job(s) will then be printed.
4. Your job(s) will begin printing.

To access the photocopying and scanning features of the unit, follow the instructions below.

1. Tap your WesternONE card to log in
2. Press the Home button to access the main menu.
3. Tap Scan to Email to access scanning, or Basic Copy to access photocopying.

If you log in to your PC with your Western username and password, please see Installing a Printer on Windows (UWO domain).

If you do not log in to your PC with your Western username and password, please see Installing a Printer on Windows (non-UWO domain).

Download and install the Toshiba e-STUDIO macOS printer driver. Follow the instructions at Installing a Printer on macOS, noting the printer-specific steps below.

Step 1	Enter smb://sciprint2.uwo.ca/mc352 in the URL field
Step 2	Select TOSHIBA ColorMFP in the Printer Software dialog box.
Step 3	In the printer options dialog, select the following values:	Model Selection: TOSHIBA e-STUDIO5005ACSeries Finisher: Finisher (2 Trays + 1 Fixed Tray) Hole Punch Unit: None Drawers: Drawer 1, 2 & LCF External LCF: Not Installed

Download the Toshiba e-STUDIO Ubuntu printer driver. Open a terminal and install the driver:

cd ~/Downloads
sudo tar xvf TOSHIBA_ColorMFP_CUPS.tar -C /

Follow the instructions in Installing a Printer on Ubuntu, noting the printer-specific steps below.

Step 1	Enter sciprint2.uwo.ca/mc352 in the SMB Printer field.
Step 2	Select Toshiba for the manufacturer of the printer.
Step 3	Select ColorMFP from the Models list, and TOSHIBA ColorMFP from the Drivers list.
Step 4	On the Installable Options screen, select the following values:	Model Selection: TOSHIBA e-STUDIO5005ACSeries Finisher: Finisher (2 Trays + 1 Fixed Tray) Hole Punch Unit: None Drawers: Drawer 1, 2 & LCF External LCF: Not Installed